21.02.2019
Memory-Map Navigator v4.2.1 Build 414 serial key or number

Memory-Map Navigator v4.2.1 Build 414 serial key or number

By  Memory-Map Navigator v4.2.1 Build 414 serial key or number  0 Comments
Memory-Map Navigator v4.2.1 Build 414 serial key or number

Memory-Map Navigator v4.2.1 Build 414 serial key or number

PMC

4. Discussion

In this study, we demonstrate that amnesic patients with primary damage to the hippocampus bilaterally were unable to solve a novel associative learning task whose solution necessitated the acquisition of configural information. Our results show that patients were similarly impaired at configural learning within the spatial and non-spatial domains. Further, our findings demonstrate that residual configural learning can occur in the presence of hippocampal dysfunction. Moreover, we observed that such residual learning was associated with explicit knowledge of the relevant task contingencies in a post-experimental debriefing session. However, patients performed poorly when asked to estimate outcome probabilities in more general situations, suggesting that their knowledge of the task structure was relatively inflexible and concrete in nature. Interestingly, the explicit knowledge demonstrated by patients in the debriefing session appeared to correspond with the best-fit strategy identified by our strategy analysis. These findings therefore suggest that residual learning in patients relies upon regions within the MTL, rather than a striatal-based system often engaged when learning is supervised (i.e. feedback is given) and occurs over numerous trials. In summary, our results support the view that the hippocampus plays an important role in both spatial and non-spatial configural learning, and provide insights into the role of the MTL more generally in incremental reinforcement-driven learning.

Our findings demonstrate that the human hippocampus participates in both spatial and non-spatial configural learning. This contrasts with recent findings that rats with hippocampal lesions were selectively impaired at a spatial, but not a non-spatial, configural task (Sanderson et al.,

Источник: [standardservices.com.pk]
, Memory-Map Navigator v4.2.1 Build 414 serial key or number

Released 9/15/

Features:

  • Added the configuration option for enabling shadow DOM querying globally, per-suite, per-test, or programmatically. Addresses #
  • Added a option to request interception with , allowing redirects to be followed before continuing to response interception. Addresses #
  • Added the capability to specify and when stubbing static responses with . Addresses #
  • Installing Cypress pre-releases no longer requires setting the environment variable. Addresses #

Performance Improvements:

  • Fixed a performance issue which led to CPU bottlenecking during Cypress runs. Addresses # and #

Bugfixes:

  • Fixed an issue where using TypeScript path aliases in the plugins file would error. Addresses #
  • Fixed an issue where using within a shadow root would not yield the correct element. Addresses #
  • Fixed an issue where querying the shadow DOM in a callback would throw the error . Addresses #
  • Fixed an issue with special characters moving the cursor to the current line instead of the entire text editable when typing in a element. Addresses #
  • Fixed an issue where typing into a manually-focused number input would prepend the number instead of appending it. Addresses #
  • now fires a event instead of an event. Addresses # and #
  • Fixed long selectors in the selector playground text input overflowing other page elements. Addresses # and #
  • Fixed an issue where assertions on would be called twice. Addresses #
  • Fixed an issue that caused the Open in IDE button on hooks and tests not to appear in Firefox. Addresses #
  • Fixed an issue causing Cypress to hang on test retry in run mode with certain assertions. Addresses #

Documentation Changes:

  • Fixed examples of delaying and throttling responses with . Addresses #
  • Added examples of using a response function with . Addresses #
  • Removed unmaintained languages. English docs is the only supported language by the Cypress team. We greatly appreciate the contributions from the community for other languages, but these docs are largely stale, unmaintained, and partial. The Cypress team will seek out more scalable docs internalization implementation in the future.

Misc:

  • The configuration flag has been removed. It is no longer necessary to enable shadow DOM testing.
  • Improved the error message when the subject provided to is not a shadow host. Addresses #
  • Improved the error message when the Cypress binary is not executable. It now recommends trying to clear the cache and re-install. Addresses #
  • Added missing type declarations for the command.
  • Updated the type declaration for , adding to the list of allowed return types. Addresses #

Released 9/1/

Features:

  • Introducing experimental full network stubbing support .
    • With enabled, the command is available.
    • By using , your tests can intercept, modify, and wait on any type of HTTP request originating from your app, including s, requests, beacons, and subresources (like iframes and scripts).
    • Outgoing HTTP requests can be modified before reaching the destination server, and the HTTP response can be intercepted as well before it reaches the browser.
    • See the docs for more information on how to enable this experiment.
  • now accepts an option for specifying the constructor with which to create the event to trigger. Addresses #

Bugfixes:

  • Improved warnings for when user is exceeding test limits of the free Dashboard plan. Addresses #
  • Added to types. Addresses #
  • Added types for field on . Addresses #
  • Fixed a typo in type definitions. Addresses #
  • Cypress now resolves and loads standardservices.com.pk for TypeScript projects starting from the plugins directory. Addresses #
  • Fixed an issue where, if npm config&#x;s is set, unexpected behavior could occur. Addresses #
  • Fixed an issue where nesting hooks within other hooks caused the test to never finish. Addresses #
  • Fixed an issue in where tests would unexpectedly fail with a Can&#x;t resolve &#x;async_hooks&#x; error. Addresses #
  • Fixed an issue where return values from blob utils were mistaken for promises and could cause errors. Addresses #
  • Fixed an issue with loading files. Addresses #
  • Fixed an issue causing tests to run slowly in Electron. Addresses #
  • Using with only chainer assertions will now throw an error. Addresses #
  • now includes the property in the event object when appropriate. Addresses #
  • Fixed an issue where Cypress would not detect newer bit installations of Chrome on Windows. Addresses #
  • Fixed an issue where Cypress would not detect per-user Firefox installations on Windows. Addresses #

Dependency Updates:

  • Updated dependency to version . Addresses #
  • Updated dependency to version . Addresses #
  • Updated dependency to version . Addresses #

Released 8/19/

Summary:

Cypress now includes support for test retries! Similar to how Cypress will retry assertions when they fail, test retries will allow you to automatically retry a failed test prior to marking it as failed. Read our new guide on Test Retries for more details.

Breaking Changes:

Please read our Migration Guide which explains the changes in more detail and how to change your code to migrate to Cypress

  • The plugin has been deprecated in favor of test retries built into Cypress. Addresses #
  • The option has been renamed to to more closely reflect its behavior. Addressed in #
  • The configuration has been renamed to to more closely reflect its behavior. Addressed in #
  • The option has been renamed to to more closely reflect its behavior. Addresses #
  • is now a requirement to run Cypress on Linux. Addressed in #
  • Values yielded by , , and will now contain the property if specified. Addresses #
  • The configuration flag has been removed, since this behavior is now the default. Addresses #
  • The return type of the methods , , , and have changed from to . Addresses #
  • Cypress no longer supports file paths with a question mark in them. We now use the webpack preprocessor by default and it does not support files with question marks. Addressed in #
  • For TypeScript compilation of spec, support, and plugins files, the option is no longer coerced to . If you need to utilize , set it in your . Addresses #
  • Cypress now requires TypeScript +. Addressed in #
  • Installing Cypress on your system now requires standardservices.com.pk 10+. Addresses #
  • In spec files, the values for the globals and no longer include leading slashes. Addressed in #

Features:

  • There&#x;s a new configuration option to configure the number of times to retry a failing test. Addresses #
  • , , and now accept options , , , and to hold down key combinations while clicking. Addresses #
  • You can now chain off of and to disabled snapshots during those commands. For example: . Addresses #

Bugfixes:

  • The error will no longer incorrectly throw when rerunning tests in the Test Runner. Fixes # and #
  • Cypress will no longer throw a error during on Firefox versions >= Fixes #
  • The error will no longer throw when calling on an element in the shadow dom. Fixes #
  • Cypress environment variables that accept arrays as their value will now properly evaluate as arrays. Fixes #
  • Elements having will no longer be considered hidden if it has child elements within it that are visible. Fixes #
  • When is enabled, and commands now work correctly in shadow dom as well as passing a selector to when the subject is in the shadow dom. Fixed in #
  • Screenshots will now be correctly taken when a test fails in an or hook after the hook has already passed. Fixes #
  • Cypress will no longer report screenshots overwritten in a option as a unique screenshot. Fixes #
  • Taking screenshots will no longer fail when the screenshot names are too long for the filesystem to accept. Fixes #
  • The last used browser will now be correctly remembered during if a non-default-channel browser was selected. Fixes #
  • For TypeScript projects, will now be loaded and used to configure TypeScript compilation of spec and support files. Fixes # and #
  • now correctly show the number of passed and failed tests when a test passes but the fails. Fixes #
  • The Developer Tools menu will now always display in Electron when switching focus from Specs to the Test Runner. Fixes #

Documentation Changes:

Misc:

  • Cypress now uses the webpack preprocessor by default to preprocess spec files.
  • The Runs tab within the Test Runner has a new improved design when the project has not been set up or login is required. Addressed in #
  • The type for the object returned from is now correct. Addresses #
  • The type definition for Cypress&#x;s can now be extended. Addresses #
  • The type definition for has been added. Addresses #

Dependency Updates

  • Upgraded Chrome browser version used during cypress run and when selecting Electron browser in cypress open from to . Addressed in #
  • Upgraded bundled standardservices.com.pk version from to . Addressed in #
  • Upgraded from to . Addressed in #
  • Upgraded from to . Addressed in #
  • Upgraded from to . Addressed in # and #
  • Upgraded from to . Addressed in #
  • Upgraded from to . Addressed in #
  • Upgraded from to . Addressed in #
  • Upgraded from to . Addressed in #
  • Upgraded from to . Addressed in #

Released 8/5/

Bugfixes:

  • The error will no longer incorrectly throw when rerunning tests in the Test Runner. Fixes #
  • Skipping the last test before a nested suite with a hook will now correctly run the tests in the suite following the skipped test. Fixes #

Dependency Updates:

  • Upgraded from to . Addressed in #
  • Upgraded from to . Addressed in #

Released 8/3/

Features:

  • Now you can control whether screenshots are automatically taken on test failure during by setting in your configuration. Addresses #
  • The now has access to a readonly property within the object that returns the current Cypress version being run. This will allow plugins to better target specific Cypress versions. Addresses #
  • During , you can now run a subset of all specs by entering a text search filter and clicking &#x;Run n tests&#x;. Addresses #

Bugfixes:

  • elements that have a parent with will now correctly evaluate as visible. Fixes #
  • Applications using custom elements will no longer trigger infinite XHR request loops. Fixes #
  • When snapshotting the DOM, Cypress no longer causes to be triggered on custom elements. Fixes #
  • Spec files containing characters now properly run in Cypress. Fixes #
  • When using the shortcut in , an error is now thrown when the fixture file cannot be found. Fixes #
  • Cypress no longer thrown error when passing a file containing content to . Fixes #
  • Values containing exponential operators passed to via the command line are now properly read. Fixes #
  • The Open in IDE button no longer disappears from hooks when the tests are manually rerun. Fixes #
  • When is enabled, AST rewriting will no longer return an output before the body is done being written. This would happen when the response body was too large and the response would be sent while the body was still being modified. Fixes #
  • When using , Cypress now properly types into an input within an iframe that auto focuses the input. Fixes #

Misc:

  • Dependencies for our npm package are no longer pinned to a specific version. This allows the use of to fix security vulnerabilities without needing a patch release from Cypress. Addresses #
  • We now collect environment variables for AWS CodeBuild when recording to the Dashboard. Addressed #
  • Types inside Module API are now accessible via the namespace. Addresses #
  • We added more type definitions for the command. Addresses #
  • Cookie command&#x;s property type is now a Number instead of a String. Addresses #
  • There are some minor visual improvements to the Test Runner&#x;s Command Log when hovering, focusing and clicking on hook titles and pending tests. Addressed in #

Dependency Updates:

  • Upgraded from to . Addressed in #
  • Upgraded from to . Addressed in #

Released 7/21/

Features:

  • You can now pass an option to to skip checking whether the element is scrollable. Addresses #
  • now accepts Dates as well as a Number for now. Fixes #
  • The Module API has a new function to assist in parsing user-supplied command line arguments using the same logic as uses. Addesses #

Bugfixes:

  • Running multiple specs within Firefox during on Windows will no longer fail trying to make a connection to the browser. Fixes #
  • Cypress will no longer throw a error during on Firefox versions >= Fixes #
  • Fixed an issue where Cypress tests in Chromium-family browsers could randomly fail with the error WebSocket is already in CLOSING or CLOSED state. Fixes #
  • Taking a screenshot of an element that changes height upon scroll will no longer throw an error. Fixes #
  • Setting or from within the test configuration now properly changes the viewport size for the duration of the suite or test.
  • Setting deep objects and arrays on within the now sets the values correctly. Fixes #
  • The progress bar for now reflects the correct and of the command. Fixes #
  • The command&#x;s progress bar will not longer restart when its parent test is collapsed in the Command Log. Fixes #
  • Key value pairs sent to as will now be properly read in. Fixes #
  • Stubbed responses responding with an empty string to now correctly display as &#x;xhr stub&#x; in the Test Runner&#x;s Command Log. Fixes #
  • Quickly reclicking the Run All Tests button in the Test Runners&#x; Command Log will no longer throw errors about undefined properties and the tests will no longer hang. Fixes #

Misc:

  • The error messages thrown from and now mention that extensions are supported. Addresses #
  • The style when focusing on tests in the Command Log has been updated. Addresses #

Dependency Updates:

  • Upgraded from to . Addressed in #
  • Upgraded from to . Addressed in #
  • Upgraded from to . Addressed in #
  • Upgraded from to . Addressed in #
  • Upgraded from to . Addressed in #
  • Upgraded from to . Addressed in #
  • Upgraded from to . Addressed in #
  • Upgraded from to . Addressed in #
  • Upgraded from to . Addressed in #
  • Upgraded from to . Addressed in #, #, and #

Released 7/7/

Features:

  • You can open a , , , and hook definition in your IDE from the Test Runner&#x;s Command Log by clicking the Open in IDE button. Addresses #
  • , , , and hook definitions now display separately in the Test Runner&#x;s Command Log when defined in separate hook definitions. Addresses #
  • You can now open a spec file directly from the Tests tab in the Test Runner by clicking the Open in IDE button. Addresses #

Bugfixes:

  • HTTP requests taking longer than the default will no longer be prematurely canceled by the Cypress proxy layer. Fixes #
  • Using Cypress commands to traverse the DOM on an application with a global variable will no longer throw Illegal Invocation errors. Fixes #
  • When is enabled, using on an input in the Shadow DOM will not result in an error. Fixes #
  • When is enabled, checking for visibility on a shadow dom host element will no longer hang if the host element was the foremost element and had an ancestor with fixed position. Fixes #
  • Debug logs from the module will no longer appear if any environment variable was set. Fixed #

Misc:

  • We made some minor UI updates to the Test Runner. Addresses # and #

Dependency Updates:

  • Upgraded from to . Addressed in #

Released 6/23/

Features:

  • An animated progress bar now displays on every command in the Command Log indicating how long the command has left to run before reaching its command timeout. Addresses #
  • There is now an configuration option. When this option is , Cypress will automatically replace with a polyfill that Cypress can spy on and stub. Addresses #
  • You can now pass a flag to to silence any Cypress specific output from stdout. Addresses #

Bugfixes:

  • now correctly resolves when waiting for XHR requests that contain resource-like text in the XHR&#x;s query params or hash (like , ., ). #
  • We fixed a regression in where errors thrown from the application under test as strings would not be correctly handled. Fixes #
  • We fixed a regression in where would hang if the subject had a shadow root and was not enabled. Fixes #
  • We fixed a regression in so that now properly asserts against , or element&#x;s values. Fixes #
  • Cypress no longer responds with responses during a recorded when the stdout is too large. Fixes #
  • We fixed an issue where Cypress could exit successfully even with failing tests when launched in global mode. Fixes #
  • Assertion logs now properly display as parent commands in the Command Log regardless of what is in the hook. Fixes #
  • When is enabled, querying shadow dom in certain situations will no longer cause the error during . Fixes #
  • Highlighting of elements upon hover of a command in the Command Log are now visible when targeting absolute positioned elements. Fixes #
  • will no longer crash when provided an empty string to the flag. Fixes #

Misc:

  • There is now a loading state to indicate when tests are loading in the Command Log. Addresses #
  • The type definitions for , , and have been updated to allow TypeScript types. Addresses #
  • The type definitions for now correctly yield the type of the previous subject. Addresses #
  • The type definitions now allow for the &#x;key&#x; keyword when chaining off &#x;any&#x; or &#x;all&#x; assertion chainers. Addresses #

Dependency Updates:

  • Upgraded from to . Addressed in #
  • Upgraded from to . Addressed in # and #
  • Upgraded from to . Addressed in #
  • Upgraded from to . Addressed in #
  • Upgraded from to . Addressed in #
  • Upgraded from to . Addressed in #
  • Upgraded from to . Addressed in #

Released 6/8/

Features:

Bugfixes:

  • Upon domain navigation, and hooks defined in completed suites no longer erroneously rerun. Fixes #
  • Errors thrown within root level hooks now correctly display in the Test Runner&#x;s Command Log. Fixes #
  • We fixed a regression in where an XHR response without a body would cause Cypress to throw . Fixes #
  • We fixed a regression in where using to an authenticated URL would error with Fixes #
  • We now properly load code from the or when they are TypeScript files. Fixes #
  • utf-8 characters now properly display within error code frames. Fixes #
  • Errors thrown in a fail handler now display a stack trace and code frame pointing to the origin of the error. Fixes #
  • now properly clicks on wrapped inline elements when the first child element in the parent element has no width or height. Fixes # and #
  • now properly respects the option. It also better handles situations when passed a promise that never resolves. Fixes #
  • When is enabled, Cypress will no longer exit with SIGABRT in certain situations. Fixes #
  • We fixed a regression in where the Tests button in the Test Runner wouldn&#x;t take you back to the tests list in all browsers. Fixes #
  • Using the shortcut during no longer does anything. This prevents the Test Runner from getting into a &#x;stuck&#x; state. Fixes #

Misc:

  • The design of errors and some iconography displayed in the Test Runner&#x;s Command Log have been updated. Addresses #, # and #
  • The commands in the Test Runner&#x;s Command Log now display in the same casing as the original command. Addresses #
  • The navigation links in the Test Runner now display the correct CSS styles when focused. Addresses #
  • now has TypeScript types for the option. Addresses #
  • TypeScript types for options and have been updated to be more accurate. Addresses #
  • TypeScript types for have been added. Addresses #
  • We now display a more accurate error message when passing a browser to the flag that is not supported by Cypress. Addresses #
  • We&#x;re continuing to make progress in converting our codebase from CoffeeScript to JavaScript. Addresses # in # and #

Dependency Updates:

  • Upgraded from to . Addressed in #
  • Upgraded from to . Addressed in #

Released 5/26/

Features:

  • now supports an option that can be used to set the encoding of the response body, defaulting to . Addresses # and #

Bugfixes:

  • We fixed a regression in where the address bar of the application under test would disappear when scrolling commands ran and the application under test would visually shift after taking screenshots. Fixes # and #
  • We fixed a regression in where test runs could hang when loading spec files with source maps. Fixes #

Misc:

  • We now display a more descriptive error message when the plugins file does not export a function. Addresses #

Released 5/20/

Features:

  • Errors in the Test Runner now display a code frame to preview where the failure occurred with the relevant file, line number, and column number highlighted. Clicking on the file link will open the file in your preferred file opener and highlight the line and column in editors that support it. Addresses #
  • Cypress now utilizes source maps to enhance the error experience. Stack traces are translated so that your source files are shown instead of the generated file that is loaded by the browser. Cypress will include an inline source map in your spec file. If you modify the preprocessor, ensure that inline source maps are enabled to get the same experience. Users of should upgrade to v or later of the package which will correctly inline source maps. Addresses #, # and #
  • Cypress now enables AST-based JS/HTML rewriting when setting the configuration option to . Addresses #
  • Number arguments passed to , , , , and assertions chainers are now automatically cast to strings for comparison. Addresses #

Bugfixes:

  • Default TypeScript options are now set to which standardservices.com.pk and the browser expect. This fixes a situation where setting a different module in a would cause errors to throw if you had , or keywords in your code. Fixes #, #, #, and #
  • When is enabled, setting or to a relative href, or using or with a relative href will no longer navigate the AUT to the wrong URL. Fixes # and #
  • When is enabled, the use of and will no longer cause the AUT to break out of the Cypress iframe. Fixes # and #
  • When is enabled, calls to , , and other will no longer point to the wrong reference after being proxied through Cypress. Fixes #
  • When is enabled, scripts using the attribute for sub-resource integrity (SRI) will now load after being proxied through Cypress. Fixes #
  • When is enabled, the use of to set the URL will no longer navigate the AUT to the wrong URL. Fixes #
  • Type definitions will no longer conflict when running Cypress in a project with Jest. Fixes #
  • We increased the timeout for launching Firefox from seconds to 50 seconds. Previously, users hitting this limit would encounter a cannot open socket error; now, the error will be wrapped. Fixes #
  • will now click in the correct coordinates when either x or y coordinate options are zero. Fixes #
  • Cypress no longer displays when a browser can&#x;t connect. Fixes #
  • You can now pass the option to to select options within a disabled . Addresses #
  • We now throw an error when attempting to an within a disabled . Fixes #
  • We fixed a regression in where the message output during errors were not formatted correctly. Fixes #
  • Using now correctly behaves the same as Lodash&#x;s capitalize method. Fixes #
  • When is enabled, clicking on a component spec now watches the correct file without assuming it is an integration file. Fixes #
  • Firefox video recording no longer crashes Cypress when running very short spec files. Fixes #
  • Applications containing a DOM element with an id attribute containing &#x;jquery&#x; will no longer throw an error during . Fixes #
  • Long errors generated when compiling or bundling the test file are now horizontally scrollable. Fixes #

Misc:

  • Cypress no longer requires write access to the root of the project, it instead will display a warning when no write access is given. Addresses #
  • We increased the timeout for launching Chrome from 20 seconds to 50 seconds. Addressed in #
  • We increased the timeout for macOS or Linux to exit from a command when looking for available browsers from 5 seconds to 30 seconds. Addressed in #
  • We improved error handling when Cypress launches Chromium-family browsers. Addresses #
  • We now export types as a partial of the full options interface. Addresses #
  • We&#x;re continuing to make progress in converting our codebase from CoffeeScript to JavaScript. Addresses # in #, #, #, #, #, and #

Dependency Updates:

  • Upgraded from to . Addressed in #
  • Upgraded from to . Addressed in #
  • Upgraded from to . Addressed in #
  • Upgraded from to . Addressed in # and #
  • Upgraded from to . Addressed in #
  • Upgraded from to . Addressed in #
  • Upgraded from to . Addressed in #

Released 4/28/

Features:

Bugfixes:

  • Custom Mocha reporters will now correctly use the version of Mocha bundled with Cypress. Fixes # and #
  • We better account for word boundaries in application scripts when is . Fixes #
  • Fixed an issue where iterators in TypeScript were not properly transpiled. Fixes #

Misc:

  • The update window in the Test Runner now encourages yarn users to Cypress instead of to help prevent installing 2 versions of Cypress when using yarn workspaces. Addressed in #
  • We&#x;re continuing to make progress in converting our codebase from CoffeeScript to JavaScript. Addresses # in # and #

Dependency Updates:

  • Upgraded from to . Addressed in #

Released 4/20/

Bugfixes:

  • Cypress can now launch on systems where Chromium is installed via Snapcraft. Fixes #
  • We now check whether the event&#x;s target element is detached before issuing the event during . Fixes #
  • We fixed a regression in where the Test Runner could send an organization ID during project setup when the default organization is preselected. Fixes #
  • We fixed a regression in that caused projects to include bundled TypeScript. Fixes #
  • Fixed an issue where sites that set headers would fail to load in Cypress. Fixes #

Misc:

  • We fixed some extra spacing displaying below the project nav in the Test Runner. Addresses #
  • The typings for run results when using the Module API now indicate they can be or . Addresses #
  • We&#x;re continuing to make progress in converting our codebase from CoffeeScript to JavaScript. Addresses # in #

Released 4/13/

Features:

  • TypeScript test files are now supported without using special preprocessors plugins. Addresses #

Bugfixes:

  • We fixed an issue where Cypress could crash with a error when testing applications that make use of WebSockets. Fixes #
  • Uncaught errors thrown from within application or test code now display their proper stack trace. Fixes #
  • Assertion errors now include a stack trace that includes the calling code. Fixes #
  • We now clone the object passed into Cypress commands so that they&#x;re not mutated and receive the proper . Fixes #
  • We fixed an issue where invalid values could cause requests to fail with a error. Now, invalid values will be ignored. Fixes #

Misc:

  • Cypress no longer hides output from , , , or commands when npm log level is or . Addresses #
  • The error message is now more specific about the promise resolution value required. Addresses #

Dependency Updates:

  • Upgraded from to . Addressed in #

Released 3/30/

Features:

  • Errors shown in the Test Runner have a new design including an expandable stack trace, better highlighting of code elements, and &#x;Learn more&#x; links that link to relevant Cypress documentation. This is part of our larger improvements to error display with more exciting features to come. Addresses #
  • When you open a Cypress project, clicking on the Settings tab and clicking into the Experiments panel will display the experimental features that are available and whether they are enabled for your project.
  • Added support for setting cookie values via . Addresses #
  • Added experimental support for adding values to the objects yielded from , , and . Users can enable this by setting the configuration value to . In Cypress 5, this will be the default. Addresses #
  • Added support for the cookie attribute in , , and proxied HTTP requests. Addresses #
  • When an assertion is retried (using ) and fails, it now shows the diff in the . Addresses #

Bugfixes:

  • Fixed a regression in where cypress installation could fail if Git is not installed. Fixes #
  • Fixed a regression in where certain HTTP requests could fail with or . Fixes #
  • Fixed a regression in where Electron deprecation warnings were printed to stderr in open mode. Fixes #
  • Cookies set with a Domain containing an unknown TLD are now sent along for all requests. For example, a cookie like will now be sent during standardservices.com.pkt() to . Fixes #
  • We fixed a situation where a cross-origin errors could incorrectly throw in Chrome. Fixes #
  • Visibility checks against
Источник: [standardservices.com.pk]
Memory-Map Navigator v4.2.1 Build 414 serial key or number

LTS Changelog

Legend:
  • security fix
  • major bug fix
  • bug fix
  • major enhancement
  • enhancement
Community feedback:
  • no major issues
  • notable issues
  • required rollback

What's new in ()

  • Important security fixes from Jenkins and (security advisory)
  • Stop pre-formatting agent logs to prevent deadlocks (regression in ). (issue )
  • Fix button that copies API token to clipboard (regression in ). (issue )
  • Restore wrapping tabs into multiple lines instead of overflowing (regression in ). (issue )
  • Normalize widget colors to be consistent with the new color palette. (Fixes bread crumbs flash in Dark Theme)
  • Empty installed plugins table text is readable again (regression in ). (issue )
  • Show build time data in the Build Time Trend Page (regression in ). (issue )
  • Replace text references to slave with agent in Japanese documentation and messages. (issue )
  • Fix backspace key sometimes did not delete text from the Script Console on a Mac (regression in ). (issue )
  • Fix regular expression validator UI location (regression in ). (issue )
  • Prevent concurrent build deletion. (issue )
Notable changes since
  • Release 'alpha' dark theme. (issue , pull , issue , pull , pull , pull , pull , pull , Dark Theme repository, Introducing the Jenkins Dark Theme)
  • Stop supporting .NET Framework for launching Jenkins server and agents as a Windows service. .NET Framework or above is now required. (announcement, upgrade guidelines, issue , issue , Windows support policy)
  • Update Windows Service Wrapper (WinSW) from executable for .NET Framework to for .NET Framework Includes numerous improvements and bugfixes. Most notably, the service installer will now ask for permission elevation if the required. (changes summary, full WinSW changelog, Windows Agent Installer changelog)
  • Show in plugin manager when newer releases of plugins exist but aren't being offered due to unsatisfied requirements. Show warnings for deprecated plugins in the update manager and administrative monitors. (pull , issue , pull , issue )
  • Provide a more modern look and feel for the Jenkins UI. (issue , pull , issue , pull , issue , pull , issue , pull , issue , pull , Configuration UI Accessibility: Tables to Divs migration, pull , issue , issue )
  • Remove page generation timestamp from the footer. (issue )
  • Allow users with Overall/Manage permission to configure Node Monitoring and to reload configuration from disk. (issue , pull , issue , pull )
  • Add system read support for 'Node Monitoring Configuration', configuring clouds, viewing agent configuration, system information, and logs. (issue )
  • Support Bearer tokens in Jenkins-CLI parameter. (pull )
  • Security hardening: Always round-trip password form control values in an encrypted form, even if not backed by an encrypted field. In case of problems, this can be disabled by setting the system property to on startup. (issue )
  • Security hardening: Always use a placeholder value for password form control values in item related configuration forms when the user is missing Item/Configure permission, even if not backed by an encrypted field. In case of problems, this can be disabled by setting the system property to . (issue )
  • Fix the default domain name in Windows service configurations. (issue , Windows Service Wrapper changelog)
  • Update Winstone from to Update Jetty from v to v Add option that activates automatic HTTP request redirects to HTTPs. (pull , v changelog, v changelog, v changelog)
  • Fix option which had no effect (regression in ). (issue )
  • Update Stapler from to (issue , pull , Stapler changelog)
  • Add the ability to filter out environment variables for Shell and Windows batch build steps. (issue )
  • Fix error caused by misbehaviour in (regression in ). (issue )
  • Remove the fallback Jenkins URL from the JNLP launch file so that WebSocket agents can be connected over Java Web Start. (issue )
  • Allow fingerprint storage engine to be selected from the configuration page. Add new external fingerprint storage API methods. (pull , issue , pull , JEP, Fingerprint API Javadoc, Redis reference implementation)
  • Developer: Add banner. (issue )
  • Developer: Add new extension points to define build step environment filters (currently in beta). (issue )
  • Internal: Upgrade to Remoting This switches standardservices.com.pk and standardservices.com.pk to a code-signing certificate owned by the CDF. (pull , Remoting changelog, Remoting changelog)

What's new in ()

  • Important security fixes. (security advisory)
  • Major update of the Alpine-based Jenkins Docker image. Jenkins Docker image for Alpine now uses Alpine and AdoptOpenJDK 8u (upgrade guide)

What's new in ()

A new GPG signing key is used for the Jenkins long term support package repositories. Follow the instructions in the Linux repository signing blog post to install the new public key on your computer.
  • Important security fixes. (security advisory)
  • Use new 64 bit Windows installer with service account checks and port validation. Supports 64 bit Java 8 and 64 bit Java (Announcement, Upgrade guide)
  • Allow graceful shutdown when SCM triggers are configured. (issue )
  • Fix error caused by misbehaviour in (regression in ). (issue )

What's new in ()

What's new in ()

What's new in ()

  • Make plugin manager work on Internet Explorer 11 again (regression in ). (issue )
  • Prevent telemetry warnings about missing classes when running with Java 11 (regression in ). (issue )
  • Fix a deadlock involving custom loggers during agent startup (regression in ). (issue )
  • Prevent Old Data Monitor from failing plugin loading in the case of class field unmarshalling issues. (issue )
Notable changes since
  • Various improvements to the plugin manager, including: It no longer shows all available plugins by default; use search field to find plugins. They are now sorted by popularity by default. Additionally, categories are no longer used to group plugins, instead they're shown as labels. (issue , pull , pull , pull , pull , pull , pull , pull , pull )
  • Organize entries on the Manage Jenkins page into categories and show them in a grid. (pull )
  • Remove 'auto refresh' feature, including now obsolete auto refresh telemetry capability. (pull )
  • Users with extended read permission now get a more read-only looking UI. (issue , pull , Read-only Jenkins Configuration blog post)
  • Allow users with Overall/SystemRead permission to view About Jenkins, Manage Plugins, Global Security Configuration, and System Log. (issue , issue , issue , issue , issue , issue , issue )
  • Distinguish between defined (*****) and undefined (N/A) password on read-only configuration forms for users with or permissions. (issue )
  • Allow users with Overall/Manage permission to access the System Information, Prepare for Shutdown, and About Jenkins management links. Usage Statistics in Global Configuration is now also configurable by users with that permission. (issue , issue , issue , issue )
  • Use modern system fonts provided by the browser when possible. Changes font size for body copy and headings to improve consistency and legibility. (issue )
  • Restyle buttons. Add support for large buttons, hyperlinks styled as buttons and icon-only buttons. (issue )
  • Restyle the help icon. (pull )
  • Improve styling of alert banners to be more visually appealing and to better match existing user interface components. Alerts now fully cover the navigation bar while they are displayed instead of covering only a portion of the navigation bar. (issue )
  • Suppress error stack traces for non-administrator users as core capability. (issue )

What's new in ()

  • Prevent a form validation " Not Found" error when the resource root URL configuration points at a previously configured resource root URL (regression in ). (issue )
  • Upgrade to Remoting to fix an issue with large payloads over WebSockets. Requires a matching with remoting or later. (issue , pull , pull , Remoting changelog, WebSockets blog post, JEP)
  • Update Groovy Init hooks to run after all job configurations are adapted. (issue )
  • Fix spacing between error messages in Setup Wizard (regression in ). (issue )
  • Fix input field hints for tools like the git plugin that search the PATH for their executable (regression in ). (issue )
  • Remove grey bar below the form elements for read only users. (issue )
  • Distinguish between defined (*****) and undefined (N/A) password on read-only configuration forms for users with Overall/SystemRead or Item/ExtendedRead permissions. (issue )
  • Users with extended read permission now get a more read-only looking UI. (issue , pull , issue , pull )

What's new in ()

  • Use the saved global build discarder configuration on restart. (issue )
  • Fix proxy form validation when a password is set (regression in ). (issue )
  • Prevent NullPointerException when hitting Check Now against a custom update center without tool installer metadata. (issue )
  • Prevent one occurrence of "standardservices.com.pkce is missing" during Jenkins restart. (pull , issue , issue , issue , issue )
  • Developer: Make and work on objects that aren't . (issue )
  • Developer: Prevent spurious deprecation messages by removing the deprecated findbugs-annotation. (issue )

What's new in ()

Jenkins was not packaged or delivered. All changes planned for are included in
  • Jenkins was not placed in the artifact repository or on the download site.

What's new in ()

Global build discarder configuration is not loaded from disk when Jenkins starts (JENKINS). Configuration is saved but not loaded on restart. Jenkins will always start with the default configuration of the Job Build Discarder. Custom global build discarder configuration is ignored on restart. The default global build discarder is configured each time that Jenkins restarts.
Notable changes since
  • Revamp the layout and icons of the header bar and breadcrumbs. Instances with plugins that depend on details of the Jenkins layout (e.g. Simple Theme Plugin) may experience UI/layout problems. A new experimental header color scheme can be enabled by setting the system property to . (issue )
  • Add globally configured build discarders that delete old builds not marked as "keep forever" even if there is no, or a less aggressive, per-project build discarder configured, executed periodically and after a build finishes. (pull )
  • Move cloud configuration from Configure System into its own configuration form on the Manage Nodes page. (pull )
  • Remove Enable Security checkbox in the Global Security configuration. (issue )
  • Remove the ability to disable CSRF protection. Instances upgrading from older versions of Jenkins will have CSRF protection enabled and the default issuer set if they currently have it disabled. (pull )
  • Redesign password fields to prevent password auto-fill except for the login form. Reduce browsers offering to update stored passwords. Revert by setting the system property to . (pull )
  • Deprecate the macOS native installer packaging. (Jenkins macOS native installer deprecation)
  • Remove old, deprecated, unsupported agent protocols , , and . Update Remoting from to to remove unsupported protocols and add WebSocket support. (issue , Remoting release notes, Remoting release notes, Remoting release notes, Remoting release notes)
  • Add experimental WebSocket support. (JEP, blog post)
  • Extends the current milestones so plugins can update jobs and configuration during Jenkins initialization. Adds initialization milestones: , , . (issue )
  • Introduce a new experimental UI that can be enabled by setting the system property to . Currently it includes a new header color scheme, more changes to be added as a part of the UI/UX revamp. (pull , issue , JEP, Jenkins UX SIG)
  • Add a new experimental permission which allows a user to configure parts of the global Jenkins configuration without having the permission. This is an experimental feature, disabled by default, that can be enabled by setting the system property to . (pull , issue , JEP)
  • Add a new experimental permission, which gives (almost) full read access to the Jenkins instance. The permission is disabled by default, install the Extended Read Permission plugin to activate it. (pull , issue , JEP, Extended Read Permission plugin)
  • The environment variable may now be used from (non-Pipeline) builds to access a temporary directory associated with the build workspace. (issue )
  • Deprecate the , , and permissions. Permissions were announced as dangerous and disabled by default in major authorization plugins in Custom authorization strategy implementations that grant without implying one or more of these three permissions will no longer work as expected. Configurations that grant any of these permissions to users without will no longer work as expected. (pull , issue , JEP,  security advisory for Matrix Authorization plugin,  security advisory for Role-Based Authorization plugin)
  • Fix NullPointerException when getting a list of runs with a status threshold (regression in ). (issue )
  • User is no longer logged out when authenticating another user. (issue )
  • Winstone Fix support of system logging customization (regression in ) (pull , issue , Winstone changelog, Jetty changelog)

What's new in ()

What's new in ()

System logging customization defect (JENKINS - system logging customization) from Jenkins is reintroduced in this version as it is considered as less serious than the fixed regressions. There is a plan to fix it again in
  • Fix propagation of the maximum form content size and form content keys number (regression in Jetty and Jenkins ). (issue )
  • Fix improper reverse proxy redirects to due to X-Forwarded-Host and X-Forwarded-Port ordering issue (regression in Jetty and Jenkins ). (issue )
  • Revert Winstone from to to resolve embedded Jetty web container regressions in later Winstone versions. High default maximum form size limit and reverse proxy redirection are restored (regressions in ). (issue , issue , Winstone changelog)

What's new in ()

  • Fix a KeyStores with multiple certificates are not supported error from Jetty when passing certain kinds of certificates, such as domain wildcards (regression in ). (pull , issue , Winstone release notes)

What's new in ()

  • Internal: Winstone Change the Jetty thread pool name to "Jetty (winstone)" (pull , issue , Winstone release notes)
  • If the Jenkins root URL has been configured by scripts prior to running the setup wizard, skip the location configuration panel even if selecting the option to skip creation of an admin user. (issue )
  • Prevent inaccurate warnings about missing classes on Java 11 triggered by JavaMelody when Monitoring Plugin is installed. (issue )
  • Include details in the system log when a build rotation fails. (issue )
  • Fix java version check for AdoptOpenJDK (issue )
  • Prevent Jenkins page rendering from being blocked when the update center data parsing is in progress. (issue )
  • Winstone Fix support of system logging customization (regression in ). (pull , issue , Winstone release notes)
  • Fix null pointer exception in Agent API when the agent is offline (e.g. retrieving agent version or OS description). (issue )

What's new in ()

  • Important security fixes. (security advisory)
  • User is no longer logged out when authenticating another user. (issue )
  • Security hardening related to Stapler routing.
  • Security hardening: Set to in REST API responses.
  • Disable multiple deletion attempts if is zero. (issue )
  • Prevent 'zombie' executors on master by removing one-off executors in standardservices.com.pkExecutor. (issue )
  • Fix AtomicFileWriter performance issue on CephFS when creating an empty file. (issue )
  • Developer: ViewGroupMixIn#getPrimaryView() may return , and needs to be checked by plugins depending on this version of weekly and beyond. It is an intermediate state until a default view is implemented. (issue )

What's new in ()

  • Show a tooltip with the full link name when hovering over sidebar links. (issue )
  • Prevent faulty subtask contributors from leaving builds running forever. (issue )
  • Fix column sorting in the Plugin Manager Install pane. (issue )
Notable changes since
  • Prevent calls to persisting data before we have finished loading the in-memory model. This prevents possible corruption of the main Jenkins configuration. (issue )
  • Remove the ability to download update center metadata using the user's browser (deprecated since ). Jenkins will no longer inform about available updates without a connection to update sites. We recommend the use of a local mirror of our update sites, or a self-hosted update center like Juseppe in these situations. (pull )
  • Allow time zone to be set on a per-user basis. (issue )
  • Add an option for a Resource Root URL through which Jenkins will serve user-generated static resources like workspace files or archived artifacts without the need for Content-Security-Policy headers. (issue )
  • Stop bundling Maven Plugin, Subversion Plugin, and several other plugins inside the Jenkins war file. In very rare cases, this could result in problems when attempting to install plugins compatible with Jenkins before The Jenkins project is currently not publishing any such plugins. (pull )
  • Deprecate the macOS native installer in favor of Homebrew. (macOS Native Installer Deprecation blog post)
  • Revert changes in forms submission in Jenkins classic UI with Firefox have caused a regression on forms with "file" inputs. These were made to anticipate a bugfix in Firefox which has been backed out since. (regression in ) (issue , issue , Firefox issue )
  • Remove character length limitation of build description in build history widget. (issue , issue )
  • Update Remoting from to Adds a new connection mode for inbound TCP agents. Update minimum required remoting version to Adds command line options "-help" and "-version". (Remoting release notes, pull , Remoting release notes, pull , pull , issue , pull , Remoting release notes, Remoting connection steps reduced)

What's new in ()

  • Robustness: Do not allow users to resubmit requests using POST on URLs requiring a form submission, as that will fail anyway. (issue )
  • The permalink was not being cached in the file. (issue )
  • Fix labels to Atom feed links. (issue )
  • Revert changes in forms submission in Jenkins classic UI with Firefox. Changes caused a regression on forms with "file" inputs. These were made to anticipate a bugfix in Firefox which has been backed out since. (regression in ) (issue , issue , Firefox issue )

What's new in ()

  • URLs of some projects with emojis in their name were inaccessible. (issue )
  • Increase client-side keep-alive ping frequency on the HTTP-based CLI to prevent timeouts. (issue )
  • Internal: returned when an error occurred even though it shouldn't. (issue )

What's new in ()

Notable changes since
  • Jenkins no longer creates symbolic links inside project or build directories. The Build Symlink plugin may be installed to restore this functionality if desired. URLs such as are not affected, only tools which directly access the filesystem. (issue )
  • Remove Trilead SSH library from Jenkins core and make it available in a new detached plugin. (issue )
  • Add support of emojis and other non-UTF-8 characters in job names. 🎉 (issue )
  • Update Windows Agent Installer from to , enabling TLS on agent downloads when running with .NET or newer. (issue , full changelog)
  • Update Winstone-Jetty from to to update Jetty to (pull , full changelog, Jetty changelog, Jetty changelog, Jetty changelog)
  • Update JNA from to to fix issue with shared library loading on AIX when using OpenJDK. (issue )
  • Update Remoting to (issue , issue , issue , full changelog)
  • Support setting excludes and case sensitivity in the build step in Pipeline and other job types. (documentation, pull )
  • Improve Configuration-as-Code compatibility of . (issue )
  • Stop using the argument in the CLI command. (pull )
  • Remove obsolete session cookies when logging out, preventing errors related to headers being too large. (issue )
  • Add support for IPv6 addresses in the Jenkins URL configuration. (issue )
  • Allow distinguishing between new projects, disabled projects, and those with aborted builds through differently shaded build balls. (pull )
  • Add a warning when cron trigger spends a long time in its execution. (issue )
  • Batch up plugin installations in setup wizard to improve performance. (pull )
  • The default interval for node monitors (e.g. free disk space) can now be changed by setting the system property . (pull , Jenkins features controlled by system properties)

What's new in ()

and contain the same security fixes. We're providing an additional release of the x LTS line to allow administrators to apply security updates without having to perform a major upgrade.

What's new in ()

  • Important security fixes. (security advisory)
  • The plugin manager UI no longer prevents disabling a plugin when other plugins only have optional dependencies to it. (issue )
  • Fix performance issue when using "Remember me". (regression in ) (issue )
  • Do not throw exception when testing proxy configuration. (regression in ) (issue )
  • Prevent occasional on Jenkins restart and invalidate the user session. (issue )

What's new in ()

  • Important security fixes. (security advisory)
  • A thread pool used to wait for external processes to complete could leak class loaders. (issue )
  • Make sure detached plugins (plugins whose functionality used to be part of Jenkins itself) are installed upon Jenkins startup when needed as implied dependencies of other plugins which were already present. This simplifies compatibility for specialized installation scenarios not using the update center, such as when Jenkins is run from a Docker image prepackaged with some plugins. (issue )
  • Update WinP from to to fix problems with a missing DLL and flickering console window in the Windows graceful process shutdown logic. (issue , full changelog)
  • Replace some exception stack traces related to agent channels with simpler messages. (issue )

What's new in ()

  • Restore Chinese localized resources used by the setup wizard. (issue )
  • Robustness: Do not put agent offline for runtime exceptions in . (issue )
Notable changes since
  • Support for the Remoting mode of the CLI ( option) has been removed. (pull , announcement blog post)
  • Remove misleading symbol for password parameter definitions, since it's actually stored encrypted. (issue )
  • Remove built-in support for CCtray (standardservices.com.pk) files. To restore this feature, install the CCtray XML Plugin. (issue )
  • Add CLI command which allows aborting builds. (issue )
  • Add support for turning off a log recorder in the logger configuration. (issue )
  • Add the run parameter filter value to REST API responses. (issue )
  • Update status icon of a build when the build is finished. (issue )
  • Remove misleading references to Java Web Start and JNLP from GUI surrounding inbound Jenkins agents. (pull )
  • Inform administrators about potentially unsafe permissions setup involving builds running as the virtual SYSTEM user. (issue )
  • Add a log message to build logs when builds run with the virtual SYSTEM authentication. (pull )
  • Migrate all Chinese localization resources into Localization: Chinese (Simplified) plugin. (pull )
  • Adjust stream flushing behavior for code running remotely on agents for better performance. This may lead to loss of messages for plugins which print to a build log from the agent machine but do not flush their output. Use to restore the previous behavior for freestyle builds. Note that Pipeline builds always expect remote flush. (pull )
  • Update Winstone from to to make HTTPS cipher exclusions configurable. (issue , issue , full changelog)
  • Remove Mailer related localized strings from core. Make sure you use Mailer Plugin (issue )
  • Do not offer a workspace lease to a new build if it is already in use by a (Pipeline) build running across an agent reconnection. (issue )
  • Developer: Update Stapler from to to add support for loading localized webapp resources from any plugin. Add interface for plugins to participate in localized resource lookup. (JEP, full changelog)
  • Developer: Update Localizer library from to allowing plugins to override the lookup for localized resource files. (pull , JEP, full changelog)
  • Developer: Add Jelly UI component for multi-line secrets analogous to for single-line. (pull , Storing Secrets in Jenkins)
  • Developer: may now be used from agent-side code. See . (pull )

What's new in ()

  • Corrupted console notes could cause an uninformative to be thrown from and build log display to be broken. (issue )
  • The setup wizard did not properly escape passwords, resulting in errors with certain special characters. (issue )
  • Make form submit buttons on the Jenkins classic UI compatible with potentially upcoming Firefox bug fix. (issue , Firefox bug )
  • Properly flush output from the Maven console annotator. (issue )
  • Make Debian/Ubuntu launcher script work with Java (issue )
  • Re-enable Stapler request dispatching telemetry. (issue )

What's new in ()

  • Security fixes. (security advisory)
  • Workspace and artifacts browsing did not work on Windows Server with Microsoft Docker. (regression in ) (issue )
  • Prevent when discarding unreadable fingerprint data. (issue )

What's new in ()

    No notable changes in this release.
Notable changes since
  • Java 11 is now fully supported. Multiple improvements for running Jenkins on Java 11 since x, including support for plugins declaring a minimum Java version in their metadata and refusing to load incompatible plugins, and installation of a new JAXB plugin when running on Java 11 to allow use of JAXB APIs from plugins. (announcement blog post, running on Java 11, upgrading to Java 11, issue , issue , issue , issue , issue , issue , issue )
  • The no longer lists items recursively when listing a specific folder. (issue )
  • Add a new CLI command to disable one ore more installed plugins and optionally restart Jenkins. (issue )
  • Update Trilead SSH library to add support for OpenSSH keys with AESCTR encryption. (issue , issue , issue , issue )
  • Add support for the ed key algorithm in Jenkins CLI. (issue )
  • Reduce the performance impact of the SECURITY fix when downloading artifacts or workspaces as ZIP file. (issue )
  • Add new category Languages to the plugin wizard, which automatically installs available localization plugins based on browser language. (pull )
  • Update Windows Service Wrapper from to and Windows Agent Installer from to to support disabling, renaming and archiving service logs. (pull , Windows Service Wrapper changelog, Windows Agent Installer Module changelog)
  • Update SSHD Module from to to apply a proper Apache Mina idle timeout value when a custom value was set using the . (issue , full changelog)
  • Developer: Login and signup pages redesigned in now can receive style contributions ( view for ) from multiple plugins. (issue )

What's new in ()

  • Improve robustness of console annotators such as the Timestamper plugin in conjunction with certain Pipeline steps such as on an agent with an old . (issue )
  • User account creation by administrators did not show error messages when it failed. (regression in and ) (issue )

What's new in ()

  • Important security fixes. (security advisory)
  • Invalidate sessions and CLI authentication caches when changing the user password in the Jenkins user database.
  • Add support for killing child processes on AIX. (issue )

What's new in ()

  • Important security fixes. (security advisory)
  • Revert compatibility fix for future releases of Firefox due to regressions it caused since (issue , issue , issue )
  • Prevent error in case a CLI command finishes before the input is entirely read. (issue )
  • Avoid error when using the CLI command. (issue )
  • Do not cache CSS/JS resource files for console annotations like Timestamper Plugin across Jenkins restarts. (issue )
Notable changes since
  • Numerous fixes and improvements to better support running Jenkins on Java (issue , issue , issue , issue , issue , issue , issue , issue , Parent POM changelog, Winstone-Jetty changelog, Groovy changelog, Jetty changelog)
  • Migrate most Simplified Chinese translations into Localization: Chinese (Simplified) Plugin. (pull )
  • Allow use of the command with Job/Read permission. (issue )
  • Wait up to two minutes for process termination before killing it (typically when aborting a build). (issue )
  • Reduce logging level of restart and shutdown related notifications from SEVERE to INFO. (issue )
  • New and environment variables can be used to configure the CLI authentication. (issue )
  • Do not submit telemetry if there's no relevant data. (issue )
  • Use per-trial correlation IDs for telemetry submissions. (issue )
  • Update Remoting from to to eliminate a potential deadlock. (full changelog, issue )
  • Developer: Add support for the lifecycle method annotation. (issue )
  • Developer: Add interface that allows implementing s to skip explicit calls to . (issue )
  • Developer: Introduce and methods in . (issue )
  • Developer: Introduce new method. (pull )
  • Developer: Add overridable to allow consistent hashing for Pipeline builds in the future. (issue )
  • Developer: mishandled its type parameter, effectively forcing all implementations to use or raw types. (pull )

What's new in ()

What's new in ()

  • The initial visibility of nested groups of radio buttons did not accurately reflect the current values. (issue )
  • Improve robustness when search items don't specify a display name. (issue )
  • Update Stapler from to to integrate a fix related to return value handling. (pull , stapler/stapler#)
  • Add telemetry trial related to Stapler request dispatching. (issue )

What's new in ()

What's new in ()

  • A configured quiet period was interpreted as milliseconds, instead of seconds. (regression in ) (issue )
Notable changes since
  • Redesigned login, signup, and Jenkins is (re)starting pages. Existing page decorators like Simple Theme Plugin will no longer work with these redesigned pages. (issue , announcement blog post)
  • Replace single per-user API token with new system of multiple, revocable, unrecoverable API tokens with usage tracking. (issue , issue , blog post)
  • The deprecated Jenkins CLI Protocol versions 1 and 2, and Java Web Start Agent Protocol versions 1, 2, and 3 have been disabled. If you still use these protocols (e.g. remoting-based CLI, or old s on agents), you need to re-enable these protocols after upgrade, or upgrade the clients. The same recommendations as in The x upgrade guide for remoting changes apply here. (issue )
  • Check SHA or SHA checksums of update site and tool installer metadata and core and plugin downloads if the update site provides them. (pull )
  • Optional extensions are now loaded without requiring to restart Jenkins after installing an optional dependency. (issue )
  • Upgrade Winstone from to to update Jetty from v to v, adding an option to enable JMX when running Jenkins using . (pull , pull , full changelog, Jetty changelog, Jetty changelog, Jetty changelog, JMX Documentation for Jetty, full list of options)
  • Upgrade Remoting from to to have agents check availability of the master's TCP Agent Listener port when connecting over TCP. (issue , issue , Remoting changelog)
  • Upgrade Bytecode Compatibility Transformer from to beta-2, upgrading ASM from to to improve support of Java 9+ runtimes. (issue , supported Java versions)
  • Update Executable WAR from to to allow running Jenkins with incompatible (too new) Java versions by setting the flag. (issue , issue , issue , Executable WAR changelog, Executable WAR changelog, supported Java versions)
  • Update instance identity module from to to improve Java 11 compatibility. (issue , full changelog)
  • Update JNA from to to add support for sx, update GNU C minimal requirement to on Unix platforms. (issue )
  • Add a new CLI command to enable one or more installed plugins and optionally restart Jenkins. (issue )
  • Add support for Zip files larger than 4 GB (Zip64). (issue )
  • Add modification timestamp to files in directory browser views such as archived artifacts and workspaces. (issue )
  • Export path to agent file system root directory in remote API. (pull )
  • Jenkins remote API: Export fingerprints for builds which do not derive from , like Pipeline builds. (issue )
  • Some deserialization rejections are now logged on WARNING log level, instead of only on FINER. (issue )
  • Instances of some item types could not be renamed. (regression in ) (issue )
  • Don't fail to archive artifacts when attributes cannot be preserved, instead log a message and proceed without preserving attributes. (regression in ) (issue )
  • Some types of builds, like pipelines, would sometimes run concurrently even when that was disabled. (issue )
  • Developer: Introduce extension point, which allows decorating the redesigned login page. (announcement blog post)
  • Internal: Update parent POM. Jenkins now requires Maven or newer to build. (pull )
  • Internal: Various improvements related to incremental Maven releases. (issue , issue , pull , JEP)

What's new in ()

  • Security fixes. (security advisory)
  • Security hardening related to Stapler routing. (SECURITY in the security advisory)
  • Robustness: Don't break queue processing when the configured queue sorter throws exceptions. (issue )
  • Allow for use in XStream (XML serialization) and Remoting (agent communication). (issue )
  • Fix a potential deadlock between queue maintenance and asynchronous execution. (issue )
  • Security hardening: Prevent files in archives from being written to a path outside the destination directory. (issue )
  • Dynamically loaded plugins now have any / extensions scheduled. (issue )
  • Developer: Remove Beta API. (issue )

What's new in ()

Источник: [standardservices.com.pk]
.

What’s New in the Memory-Map Navigator v4.2.1 Build 414 serial key or number?

Screen Shot

System Requirements for Memory-Map Navigator v4.2.1 Build 414 serial key or number

Related Posts

About Author

admin

Add a Comment

Your email address will not be published. Required fields are marked *